Turn On the car (do not start it, just turn key on) shift gear to N then turn off the car and wait for 15 seconds. Shift gear to P turn on the car (do not start just turn key on) wait for 15 seconds then turn off key and turn on again, shift gear to N the car will give you message Transmission Ready.
Posted July 16, 2020. It runs for a bit and then stops it is likely to be air trapped in the fuel line. I found this on the web from Matthew in France: After scouring the forums I finally found a solution to this starting problem. I bled the diesel system on my 1.6 tdci fusion 2005 by connecting a one way hand priming bulb to the return pipe on6. Name: chris. Ford Model: focus 1.6 econwtic. Ford Year: 2009. UK/Ireland Location: Devon. Posted December 8, 2020. Hi, My focus wont start, turns over ok but does not start, I had greenflag out and there were no faults to be read from the OBD. He Injected fluid into the air intake and that did make it fire up momentarily.
After I managed to get it off the carriageway, park it somewhere safe, switch it off - it wouldn't start again. I've had it towed home, I've hooked it up to my laptop, using Forscan and ELM327. I cleared the DTCs (maybe I shouldn't have) then restarted it to get the fresh ones. I get DTC P2458 which is about the DPF regeneration duration.Ford Model: Focus 2.0 TDCI Ford Year: 2015 UK/Ireland Location: Yorkshire Share; Posted May 15, 2020. Ford Focus Club ; Focus Mk2 1.6 Won't Start but cranks
I'm having an issue with my 1.6 tdci Fiesta on a cold start. The idle is very rough and it plumes white smoke from the exhaust. Also the check oil light comes on while this is happening. After a bit the idle smooths out, the smoke clears and the oil light goes out. I replaced the glow plugs after watching a YouTube video describing the sameOd2As.